Custom-Blend 50 Lb. Gray Non-Motified Thin-Set Mortar

Economical formula with good bond strengths for most tile projects and is recommended for floor installations.

Non-modified mortar is formulated of Portland cement, for interior and exterior use.

Use to bond vitreous, semi-vitreous or absorptive tile, ceramic, mosaic, quarry, pavers, cement, porcelain, brick and mini-brick, precast Terrazzo, and natural stone to concrete substrates, masonry, gypsum wallboard, wonderboard, backer boards, exterior grade plywood, existing ceramic tile, asbestos-free vinyl flooring, and plastic laminates.

Some applications may require using acrylic mortar Admix.

Not recommended for use over hardwood, luan, plywood, parquet, particle board, cushion, sponge-back, or asbestos containing vinyl flooring, metal, fiberglass and OSB panels.

Suitable for use with vitreous, semi-vitreous or non-vitreous tile: ceramic, mosaic, quarry, cement body tile; impervious porcelain and glass tile; brick and stone veneer; cement-based precast terrazzo; natural stone tile.

Approximately 85 to 95 sq. ft. per 50 lb. when applied with a 1/4" x 1/4" notched trowel.

Exceeds ANSIA118.1 and A118.4 specifications.

Allow to cure for a minimum of 24 hours before grouting or light traffic.

Clean up immediately with water. 50 lb. bag.