Lundmark 1 Gal. Matchless Urethane Fortified Acrylic Floor Finish

This high-performance finish has remarkable adhesive qualities, blackmark, abrasion, and scuff-resistance.

It's scrubbable, buffable, and wears extremely well.

Ideal for use in traditional as well as high-speed and ultra high-speed programs.

Use it on vinyl asbestos, asphalt, and rubber tile, linoleum, terrazzo, aggregate, quarry tile, brick, concrete, sealed wood, and parquet.

Directions : Note: Apply with a prewashed, good quality string mop or wax applicator.

Be sure mop has not been contaminated with cleaners or strippers.

Initial Application: 1.

Strip all old wax/finish with a good quality product, and rinse floor thoroughly.

Allow floor to dry completely. 2.

Apply two (2) coats of finish allowing 30-40 minutes drying time between applications.

When using as a foundation for high-speed and ultra high-speed programs, apply additional coats to create a long-lasting base.

Maintenance: 1.

Sweep and/or dust mop daily.

Damp mop daily or as needed. 2.

For high-speed and ultra high-speed maintenance programs, mop or scrub weekly (or more often) using the renovator product, allow to dry to a haze then burnish to a high-shine.

Spray Buffing: Use a prepared spray buff compound for efficient, economical, spectacular results.

Stripping: Use a good quality alkaline or ammoniated stripper. 1 gallon of Matchless will cover approximately 2500 sq. ft. with 1 coat.